Anatolia · Picasso collection

Roman Pattern Picasso Tumbled Travertine Mosaic

Item 5001-0113-0

Buy by: the case
$13.30/ sq ft
10.0 sq ft per case10 sheets per case$133.00 per case$13.30 per sheet
How much do you need? 1 case covers 10.0 sq ft

Total: $133.00

Have a large project? Ask for a quote
✓
Deliver to your addressShips from the manufacturer's warehouse · shipping calculated at checkout
–
Pickup not available for this itemNot stocked in Louisville. Call 502-325-0000 to arrange showroom pickup.
▶
See it live on a video callA Louisville showroom designer walks you through this tile and the pieces that go with it.
See it first: order one sheet $13.30 · one full sheet of this mosaic The cost will be credited toward your full order.
  • Showroom and warehouse in Louisville, KY
  • Order a sample first, we credit it on your full order
  • Tile experts available by phone and chat

Everything you need to install it

Suggested for this tile: profile height 3/8 inch for its thickness, trowel and mortar for its size, spacers for its edge. Quantities are estimates from your area; your installer has the final say.

Edge profile Jolly Decorative Edge-ProtectionFinishes exposed edges where there is no bullnose. 3/8 inch height suits this tile's 10 mm thickness; check it against your setting bed before you order.$33.99 · 8 ft 2 in length
Spacers Spacer Level System 3.0 mm (1/8") - 1000 Pcs1/8 in (3 mm) spacers for a pressed edge. Your installer may go wider.$16.99 · 1,000 pieces
Trowel 6 mm X 10 mm - Square Notched Flooring Trowel with Rubber Handle1/4 x 3/8 in notch for tile under 15 in.$13.99

Install materials ship separately from our Louisville, KY warehouse and carry their own shipping rate at checkout. Pick up in store to avoid it.

Quantities are estimates from your area above. Adjust before you add.

Specifications

Size & packaging
Nominal sizeRoman Pattern
Sheet size12 x 12 in
Actual piece size12.01 x 12.01 in (305 x 305 mm)
Thickness10 mm (0.39 in)
ShapeGeometric
Coverage per piece1.0 sq ft
Weight per piece4.9 lb
Sheets per case10
Coverage per case10.0 sq ft
Case dimensions12.64 x 12.64 x 1.89 in
Weight per case49.1 lb
Sold bySingle sheet (1.0 sq ft), or case of 10 sheets (10.0 sq ft)
Details
BrandAnatolia
CollectionPicasso
ColorPicasso
MaterialTravertine
FinishTumbled
EdgeTumbled
LookNatural Stone
Shade variationV4 · substantial variation
Country of originTürkiye
Item number5001-0113-0
Case SKU5001-0113-0-10PC-MC
Performance & ratings
Water absorption1.6%
Frost resistanceNot resistant
Scratch hardness (MOHS)3
What these ratings mean, in plain English
Water absorption
How much water the tile soaks up. Under 0.5% means almost none, which is why porcelain is safe in showers, outdoors and in freezing weather. Natural stone soaks up more, so it is sealed.
Frost resistance
Can it freeze without cracking? "Frost resistant" means yes, so it can go outside through a Kentucky winter.
Slip resistance (DCOF)
How grippy the surface is underfoot. Floors that get wet need 0.42 or more, measured wet. "Dry" means it was only rated for dry floors, so keep it to dry rooms and walls. The letters are the areas it is approved for: ID dry indoor floors, IW indoor floors that get wet, IW+ showers, steam rooms and pool decks, EW outdoor wet areas, O/G around oil and grease.
Scratch hardness (MOHS)
How hard the surface is on a 1 to 10 scale (10 is diamond). 5 or more shrugs off sand, grit and furniture legs; 7 or more is best for busy entries.
PEI wear rating
How well the glaze resists wearing through, 0 to 5. 1 and 2 are for walls, 3 is fine for any room in a home, 4 and 5 are for stores and heavy traffic.
Breaking strength
How much force a tile takes before it snaps. Floor tile needs at least 250 lbf; higher is tougher.
Chemical and stain resistance
How it stands up to cleaners and spills. Class A is the best (no mark left); Class B shows a faint mark only after the harshest chemicals.
Thermal shock and crazing
Pass means sudden hot-to-cold changes did not crack the glaze or leave hairline lines in it.
Shade variation
How much the pieces differ from one another. V1 all alike, V2 slight, V3 noticeable, V4 very different. Marble looks are usually V2 to V4, so pull tiles from several cases as you lay them.
GREENGUARD
Certified for low chemical emissions into indoor air, as listed by the manufacturer.
Installation & use
Where to useInterior Wall, Exterior Wall, Commercial
Heavy commercialNot Suitable
Floor useWall only
Wall useYes
Overage recommended10%
Natural stone careSeal before and after grouting and reseal as needed. Every piece is unique; expect variation in color and veining.

About Picasso Picasso

Picasso is a Roman Pattern tumbled travertine mosaic on a 12 x 12 in sheet. Rated for interior wall, exterior wall and commercial spaces.

Highlights

  • Look: Natural Stone, Travertine pattern
  • Finish: Tumbled
  • Where to use: Interior Wall, Exterior Wall, Commercial
  • Shade variation: V4, substantial variation
  • Coverage: 1 sq ft per sheet; 10 sheets per case

Good to know

  • Seal before and after grouting and reseal as needed.
  • Natural stone: every piece is unique; expect variation in color and veining.
  • Also in Picasso: 12 x 12 in tile, 12 x 24 in tile, 16 x 16 in tile, Cobble Stone Pattern Set tile.
  • Order one sheet first to check the color.

Questions

Where can I use Roman Pattern Picasso Tumbled Travertine Mosaic?

It is commonly used for shower floors, bathroom floors, backsplashes, and accent walls, depending on slip rating, substrate, and installation guidelines.

Is travertine-look mosaic tile good for bathrooms?

Yes, it can work well in bathroom designs when matched to the right surface, grout, and maintenance needs.

Does Roman Pattern Picasso Tumbled Travertine Mosaic need sealing?

Natural stone or pebble surfaces often need sealing before and after installation to help resist stains and moisture.

What grout color works best with mosaic tile?

Use matching grout for a seamless look or contrasting grout to highlight the pattern; always test a small area first.

Reviews