Anatolia · Purity
6 x 6 in Purity Ice Glossy Pressed Glazed Ceramic Cove Base
Item 4002-0183-0
Each piece is 6 in long and covers 0.5 linear ft of edge. $270.00 per case of 40 pieces (20.0 linear ft)
Contractors, multi-room jobs and full-house orders usually get a better price than the website shows.
Tell us the rooms and the square footage and a Louisville tile specialist will send you a quote, often the same day.
528 cases ship from the manufacturer's warehouse
21154 pieces ship from the manufacturer's warehouse
Everything you need to install it
Suggested for this tile: profile height 1/4 inch for its thickness, trowel and mortar for its size, spacers for its edge. Quantities are estimates from your area; your installer has the final say.
Install materials ship separately from our Louisville, KY warehouse and carry their own shipping rate at checkout. Pick up in store to avoid it.
Specifications
Size & packaging
Details
Performance & ratings
What these ratings mean, in plain English
- Water absorption
- How much water the tile soaks up. Under 0.5% means almost none, which is why porcelain is safe in showers, outdoors and in freezing weather. Natural stone soaks up more, so it is sealed.
- Frost resistance
- Can it freeze without cracking? "Frost resistant" means yes, so it can go outside through a Kentucky winter.
- Slip resistance (DCOF)
- How grippy the surface is underfoot. Floors that get wet need 0.42 or more, measured wet. "Dry" means it was only rated for dry floors, so keep it to dry rooms and walls. The letters are the areas it is approved for: ID dry indoor floors, IW indoor floors that get wet, IW+ showers, steam rooms and pool decks, EW outdoor wet areas, O/G around oil and grease.
- Scratch hardness (MOHS)
- How hard the surface is on a 1 to 10 scale (10 is diamond). 5 or more shrugs off sand, grit and furniture legs; 7 or more is best for busy entries.
- PEI wear rating
- How well the glaze resists wearing through, 0 to 5. 1 and 2 are for walls, 3 is fine for any room in a home, 4 and 5 are for stores and heavy traffic.
- Breaking strength
- How much force a tile takes before it snaps. Floor tile needs at least 250 lbf; higher is tougher.
- Chemical and stain resistance
- How it stands up to cleaners and spills. Class A is the best (no mark left); Class B shows a faint mark only after the harshest chemicals.
- Thermal shock and crazing
- Pass means sudden hot-to-cold changes did not crack the glaze or leave hairline lines in it.
- Shade variation
- How much the pieces differ from one another. V1 all alike, V2 slight, V3 noticeable, V4 very different. Marble looks are usually V2 to V4, so pull tiles from several cases as you lay them.
- GREENGUARD
- Certified for low chemical emissions into indoor air, as listed by the manufacturer.
Installation & use
About Purity Ice
Purity Ice is a 6 x 6 in Cove Base glossy ceramic trim piece. Rated for interior wall, shower wall and commercial spaces.
Highlights
- Finish: Glossy
- Where to use: Interior Wall, Shower Wall, Commercial
- Shade variation: V2, slight variation
- Coverage: Sold by the piece; 40 pieces per case
Good to know
- Low maintenance: clean with a pH-neutral cleaner.
- Also in Purity Ice: 3 x 12 in tile, 3 x 6 in tile, 4 x 16 in tile.
Questions
What is this ceramic profile used for?
It is used to finish inside corners, floor-to-wall transitions, and tiled edges for a cleaner, protected installation.
Can this profile be used in wet areas?
Yes, when the surrounding tile assembly is properly waterproofed and installed with compatible materials.
How do I choose the right tile profile size?
Match the profile height and shape to the tile thickness, corner type, and transition area.
What color profile should I choose?
Choose a profile color that blends with the tile for a subtle look or contrasts for a defined edge.
