Anatolia · Shop the Ivory collection ›
1 x 2 in Brick Ivory Honed Travertine Mosaic
Item 5001-0063-0-7PC-MC
which finish?
Polished is glossy and reflective. It shows the most veining and light, and is slicker when wet, so check the slip rating (DCOF) before using it on a bathroom or shower floor.
Honed is smooth and matte. Softer, more natural look, more traction when wet, and it hides water spots and footprints.
Same tile body and color, only the surface differs. Not every size is made in both finishes; a dashed size below is made in the other finish only.
Covers 7.0 sq ft per case · 7 sheets · $17.30 per sheet
Contractors, multi-room jobs and full-house orders usually get a better price than the website shows.
Tell us the rooms and the square footage and a Louisville tile specialist will send you a quote, often the same day.
5 sheets (5 sq ft) ship from the manufacturer's warehouse
Everything you need to install it
Suggested for this tile: profile height 3/8 inch for its thickness, trowel and mortar for its size, spacers for its edge. Quantities are estimates from your area; your installer has the final say.
Install materials ship separately from our Louisville, KY warehouse and carry their own shipping rate at checkout. Pick up in store to avoid it.
Specifications
Size & packaging
Details
Performance & ratings
What these ratings mean, in plain English
- Water absorption
- How much water the tile soaks up. Under 0.5% means almost none, which is why porcelain is safe in showers, outdoors and in freezing weather. Natural stone soaks up more, so it is sealed.
- Frost resistance
- Can it freeze without cracking? "Frost resistant" means yes, so it can go outside through a Kentucky winter.
- Slip resistance (DCOF)
- How grippy the surface is underfoot. Floors that get wet need 0.42 or more, measured wet. "Dry" means it was only rated for dry floors, so keep it to dry rooms and walls. The letters are the areas it is approved for: ID dry indoor floors, IW indoor floors that get wet, IW+ showers, steam rooms and pool decks, EW outdoor wet areas, O/G around oil and grease.
- Scratch hardness (MOHS)
- How hard the surface is on a 1 to 10 scale (10 is diamond). 5 or more shrugs off sand, grit and furniture legs; 7 or more is best for busy entries.
- PEI wear rating
- How well the glaze resists wearing through, 0 to 5. 1 and 2 are for walls, 3 is fine for any room in a home, 4 and 5 are for stores and heavy traffic.
- Breaking strength
- How much force a tile takes before it snaps. Floor tile needs at least 250 lbf; higher is tougher.
- Chemical and stain resistance
- How it stands up to cleaners and spills. Class A is the best (no mark left); Class B shows a faint mark only after the harshest chemicals.
- Thermal shock and crazing
- Pass means sudden hot-to-cold changes did not crack the glaze or leave hairline lines in it.
- Shade variation
- How much the pieces differ from one another. V1 all alike, V2 slight, V3 noticeable, V4 very different. Marble looks are usually V2 to V4, so pull tiles from several cases as you lay them.
- GREENGUARD
- Certified for low chemical emissions into indoor air, as listed by the manufacturer.
Installation & use
About Ivory Ivory
1x2 Inch brick Ivory honed Travertine mosaic is inspired by the classic brick pattern. The tile is the ultimate combo of delivering a street-inspired look with fine carvings. In addition, the edgy rough texture makes it look ultimately realistic and delivers an after-effect to the sites where these tiles are used. Moreover, they come in a gorgeous yet calm ivory color scheme that gives a soothing look to the environment. Give your indoors an infrequent look with a distinctive look.These 1x2 inch tiles are absolutely going to complement your bathroom area. Worrying about wet locations is not a problem here as they are specifically designed to be placed in bathrooms. In addition, they will maintain their honed finish with their scratch-resistant property. This mosaic is made with travertine material that is durable for your bathroom, living rooms, and bedroom walls. The graceful appeal of this color and pattern will make your indoor look charming. Without putting in any extra effort, your interior will look graceful where everybody would want to step in.
Questions
Where can I use 1 X 2 In Brick Ivory Honed Travertine Mosaic?
It is commonly used for shower floors, bathroom floors, backsplashes, and accent walls, depending on slip rating, substrate, and installation guidelines.
Is honed travertine-look brick tile good for bathrooms?
Yes, it can work well in bathroom designs when matched to the right surface, grout, and maintenance needs.
Does 1 X 2 In Brick Ivory Honed Travertine Mosaic need sealing?
Natural stone or pebble surfaces often need sealing before and after installation to help resist stains and moisture.
What grout color works best with ivory tile?
Use matching grout for a seamless look or contrasting grout to highlight the pattern; always test a small area first.
