9-1/2 x 86 inNominal size
MatteFinish
White OakEngineered Hardwood
5/8 inThickness
MSI · Shop the McCarran collection ›
McCarran Mable 9-1/2 x 86 in 5/8 in White Oak Engineered Hardwood
Item VTWMABLE9.5X86-5/8-4MM
Color: Mable18 colors available
Need a closer look?Order a sample for $2.99, credited toward your order
Order a sample first
$2.99 · a cut sample of this floor in the same colorThe sample cost will be credited toward your full order.
$9.99/ sq ft($340.46 / case)
Covers 34.08 sq ft per case · 6 pieces
Sample selected: $2.99
You get a cut sample of this floor in the same color. The sample cost will be credited toward your full order.
Have a large project? Ask for a quote
Contractors, multi-room jobs and full-house orders usually get a better price than the website shows.
Tell us the rooms and the square footage and a Louisville tile specialist will send you a quote, often the same day.
–
BackorderNot in stock right now. You can order it and we ship when it arrives; call us for the date.
–
▶Pickup not available until it is back in stock2900 Fern Valley Rd, Louisville
See it live on a video callA Louisville showroom designer walks you through it and the pieces that go with it.
$340.46McCarran Mable · 9-1/2 x 86 in Matte
Specifications
Size & packaging
Nominal size9-1/2 x 86 in
Thickness5/8 in
ShapePlank
Coverage per piece5.68 sq ft
Pieces per case6
Coverage per case34.08 sq ft
Sold byCase of 6 pieces (34.08 sq ft)
Details
BrandMSI
SpeciesWhite Oak
Wear layer (veneer)4.0 mm, sawn
Plank widthExtra Wide
GradeCharacter
InstallationGlue Down, Staple Down, Floating
Where in the homeOn Grade, Above Grade, Below Grade
Radiant heatYes
UseLight Commercial
Residential warrantyLifetime
Structural warrantyLifetime
Commercial warranty10 years
CertificationsGreenguard Gold, FloorScore
CollectionMcCarran
ColorMable
Material
FinishMatte
EdgeMicro-Bevel
Look
Item numberVTWMABLE9.5X86-5/8-4MM
Case SKUVTWMABLE9.5X86-5/8-4MM
Performance & ratings
What these ratings mean, in plain English
- Water absorption
- How much water the tile soaks up. Under 0.5% means almost none, which is why porcelain is safe in showers, outdoors and in freezing weather. Natural stone soaks up more, so it is sealed.
- Frost resistance
- Can it freeze without cracking? "Frost resistant" means yes, so it can go outside through a Kentucky winter.
- Slip resistance (DCOF)
- How grippy the surface is underfoot. Floors that get wet need 0.42 or more, measured wet. "Dry" means it was only rated for dry floors, so keep it to dry rooms and walls. The letters are the areas it is approved for: ID dry indoor floors, IW indoor floors that get wet, IW+ showers, steam rooms and pool decks, EW outdoor wet areas, O/G around oil and grease.
- Scratch hardness (MOHS)
- How hard the surface is on a 1 to 10 scale (10 is diamond). 5 or more shrugs off sand, grit and furniture legs; 7 or more is best for busy entries.
- PEI wear rating
- How well the glaze resists wearing through, 0 to 5. 1 and 2 are for walls, 3 is fine for any room in a home, 4 and 5 are for stores and heavy traffic.
- Breaking strength
- How much force a tile takes before it snaps. Floor tile needs at least 250 lbf; higher is tougher.
- Chemical and stain resistance
- How it stands up to cleaners and spills. Class A is the best (no mark left); Class B shows a faint mark only after the harshest chemicals.
- Thermal shock and crazing
- Pass means sudden hot-to-cold changes did not crack the glaze or leave hairline lines in it.
- Shade variation
- How much the pieces differ from one another. V1 all alike, V2 slight, V3 noticeable, V4 very different. Marble looks are usually V2 to V4, so pull tiles from several cases as you lay them.
- GREENGUARD
- Certified for low chemical emissions into indoor air, as listed by the manufacturer.
Installation & use
Where to useInterior Floor, Commercial
Floor useYes
Wall useNo
Overage recommended10%
